The rear panel of the speaker offers a switchable mic/line level XLR input and an XLR loop-thru output for connecting additional powered speakers. Additionally, the boost EQ switch adds high & low frequencies to the signal, while the two on-board limiters protect the electronics and drivers from overload. The ISO-flex painted birch plywood enclosure offers a flexible, multi-angle design and allows the speaker to double as a floor monitor. Two bar handles are offered for ease in transport, while the steel grille provides ample protection to the loudspeaker's drivers. The D.A.S. Action 12A ships with a power cord.
- Compact multi-purpose system with monitor position
- Lightweight Class-D amplifier
- 12" woofer + 1" compression driver with a titanium diaphragm
- Switch-mode power supply
- 1000W peak output
- Max SPL: 131 dB
- Reduced size and weight
- Pole mount socket
- Rigging points
Specifications
Configuration | Active 2-Way |
Total Power Capacity | 1000 W Peak 500 W RMS |
Amplifier Class | Class-D |
Drivers
HF Driver | 1 x 1" / 2.5 cm Compression Driver |
LF Driver | 1 x 12" / 30.5 cm Woofer |
Performance
Frequency Range | 50 Hz to 20 kHz -10 dB |
Maximum SPL | 131 dB |
Coverage Angle | 80° H x 50° V (Rotatable Horn) |
Input Sensitivity | Line Input: +8 dBu Mic Input: -32 dBu |
I/O Impedance | Line Input: 20 Kilohms Mic Input: 20 Kilohms |
Connectivity
Audio I/O | XLR Female Input XLR Male Thru |
Physical
Construction Material | Plywood |
Dimensions | 25.7 x 14.9 x 12.8" / 653 x 378 x 325 mm |
Weight | 44 lb / 20 kg |